Winter’s Glow Table Lamp – proiect STL 3D

3D MODEL DESCRIPTION

Let it glow, let it glow.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 01 Day, 09 Hours, 27 Minutes (will vary accord to you printer model)
Approximately Height: 14,5 cm **SUGGESTION LINKS** The links below are suggestions for the flameless candle. Attention to dimension, max acceptable is 35mm (1.4″) in the diameter. You Will Need To: Flameless LED Candle Aliexpress (Select option A 40mm x 35mm) Amazon Mercado Livre Neodymium Magnet – 02 pieces with dimension 5 x 1 mm Aliexpress Amazon

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Top Layer: You will used (Concentric) only “Top Cover File”
Recommended Initial Layer Height: 0.20 mm
Recommended Layer Height: 0.20 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: Yes. you will used (Tree manual) support only “Top File” on candle hole
Build Plate Adhesion: None. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing! Assembly Instructions Follow the images carefully to disassemble the LED candle. Then assemble it exactly as shown in the images below.

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs