Baby Dragon Articulated – proiect STL 3D

3D Model Description

Another baby dragon for your collection, because there are never too many baby dragons.

This STL file is recommended for FDM Printers!

3D Printing Time: 13 Hours 48 Minutes (will vary accord to you printer model)

Approximately Lenght: 29 cm

3D Print File Settings (For 0.4 Mm Nozzle)

Line Width/ Nozzle: 0.4 mm

First Layer Line Width: 0.48 mm / 120%

Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)

Recommended Initial Layer Height: 0.16 mm

Recommended Layer Height: 0.16 mm

Recommended Perimeters/ Walls: 3.

Recommended Infill (%): 10% (Gyroid)

Needs Support: No.

Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs