Father Christmas – Nordic – proiect STL 3D

3D MODEL DESCRIPTION

If you say you never wished Santa was a viking, I’d say you’re lying. ● This STL file is recommended for FDM Printers! ● 3D Printing Time Based on Ender 3: 18 Hours 30 Minutes (will vary accord to you printer model) ● Approximately Height: 15 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

● Line Width/ Nozzle: 0.4 mm ● First Layer Line Width: 0.48 mm / 120% ● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab) ● Recommended Initial Layer Height: 0.20 mm ● Recommended Layer Height: 0.20 mm ● Recommended Perimeters/ Walls: 3. ● Recommended Infill (%): 10% (Gyroid) ● Needs Support: No. ● Build Plate Adhesion: Skirt. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs