Gnome Phone Home – proiect STL 3D

3D MODEL DESCRIPTION

Need to set your phone aside during Christmas dinner? Why don’t you let these guys handle that for you? Don’t worry, they won’t snoop around.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 09 Hours 49 Minutes (will vary accord to you printer model)
Approximately Height: 8,7 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs