Holy Family Table Lamp – proiect STL 3D

3D MODEL DESCRIPTION

This family shines under a divine light.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 01 Day, 03 Hours, 25 Minutes (will vary accord to you printer model)
Approximately Height: 15 cm **SUGGESTION LINKS** The links below are suggestions for the flameless candle. Attention to dimension, max acceptable is 35mm (1.4″) in the diameter. You Will Need To: Flameless LED Candle Aliexpress (Select option A 40mm x 35mm) Amazon Mercado Livre

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.20 mm
Recommended Layer Height: 0.20 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: None. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing! Assembly Instructions Follow the images carefully to disassemble the LED candle. Then assemble it exactly as shown in the images below.

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs