Penguin Candle Table Lamp – proiect STL 3D

3D MODEL DESCRIPTION

This penguin’s feeling lit!
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 08 Hours, 08 Minutes (will vary accord to you printer model)
Approximately Height: 8,5 cm **SUGGESTION LINKS** The links below are suggestions for the flameless candle. Attention to dimension, max acceptable is 35mm (1.4″) in the diameter. You Will Need To: Flameless LED Candle Aliexpress (Select option A 40mm x 35mm) Amazon Mercado Livre

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: Yes. you will used (Tree manual) support only “Top Candle File” on candle hole
Build Plate Adhesion: None. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs