Quetzalcoatl Two Headed Dragon – proiect STL 3D

3D MODEL DESCRIPTION

If two heads think better than one, this guy is thriving! This articulated dragon is print-in-place, needs no supports and has a multicolor version! Can you tell which one is the main head? If you find out, let us know.
This STL file is recommended for FDM Printers!
3D Printing Time: 1 Day 23 Hours 43 Minutes
Approximately Length : 71,5 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.12 mm
Recommended Layer Height: 0.12 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!

 
Vrei să cumperi produsul printat 3D?
 
Mergi la pagina de produs